Stihl FS561C-EM Brushcutter
RRP is £1,640.00 (Inc VAT)
Christmas Savings Of £358.00
Stihl FS561C-EM Brushcutter Description
The Stihl FS561C-EM clearing saw is a powerful and versatile tool that is ideal for clearing large areas of overgrown vegetation. It is powered by a 2-stroke engine that produces 2.8 kW of power, making it capable of cutting through even the toughest branches and saplings. The saw also features a large cutting swath of 22 inches, which allows you to clear ground quickly and efficiently.
The FS561C-EM is designed for professional use and is built to withstand the rigors of everyday use. It features a durable construction with a reinforced shaft and a 4-point anti-vibration system that helps to reduce operator fatigue. The saw also has a number of features that make it easy to use, such as an ErgoStart system that makes it easier to start the engine, and a multi-function handlebar that allows you to adjust the controls to your liking.
Stihl FS561C-EM Brushcutter Features
STIHL M-Tronic - This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
STIHL ErgoStart - STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Reduced-emission engine technology - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Bike handle - When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
ADVANCE forestry harness - Great freedom of movement thanks to the freely suspended leg protection. Extremely ergonomic for forestry applications involving circular saw blades. Very light. Tool bag also available.
Compensator - This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
Stihl FS561C-EM Brushcutter Specification
Model FS 561 C-EM
Displacement 57.1cm3
Power Output 2.8kW / w3.8hp
Weight 10.2kg
Sound Pressure Level 102dB(A)
Sound Power Level 115dB(A)
Vibration Level (L/R) 3.3/3.3m/s2
Total Length without cutting tool 176cm
Standard Cutting Tool Woodcut 225-24 Saw Blade
Tank Volume 0.99L
Drive Shaft in Shaft Solid
Stihl Anti Vibration System 4-Point
STIHL ErgoStart (E) Yes
Multi-Function Handle Yes
Loop Handle / Bike Handle Bike Handle
Tool-less Handle Adjustment Yes
Harness/Carrying System Yes
Stihl Engine (Mix) 2-MIX
Stihl M-Tronic (M) Yes
Mowing/Shredding/Sawing Jobs Standard - Sawing Jobs / Retrofittable - Mowing & Shredding Jobs
Warranty 2 Years
Stihl FS561C-EM Brushcutter Promotions
Extend your STIHL Warranty on this product by an extra year, when you buy it with a STIHL Smart Connector. We will register this warranty extension for you if you buy, so you don't need to do anything else to extend the cover once bought. For more information please read the details here!
Stihl FS561C-EM Brushcutter Arrange a Consultation
$INSERT:Consult$The Stihl FS561C-EM clearing saw is a powerful and versatile tool that is ideal for clearing large areas of overgrown vegetation. It is powered by a 2-stroke engine that produces 2.8 kW of power, making it capable of cutting through even the toughest branches and saplings. The saw also features a large cutting swath of 22 inches, which allows you to clear ground quickly and efficiently.
The FS561C-EM is designed for professional use and is built to withstand the rigors of everyday use. It features a durable construction with a reinforced shaft and a 4-point anti-vibration system that helps to reduce operator fatigue. The saw also has a number of features that make it easy to use, such as an ErgoStart system that makes it easier to start the engine, and a multi-function handlebar that allows you to adjust the controls to your liking.
STIHL M-Tronic - This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
STIHL ErgoStart - STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Reduced-emission engine technology - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Bike handle - When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
ADVANCE forestry harness - Great freedom of movement thanks to the freely suspended leg protection. Extremely ergonomic for forestry applications involving circular saw blades. Very light. Tool bag also available.
Compensator - This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
Model FS 561 C-EM
Displacement 57.1cm3
Power Output 2.8kW / w3.8hp
Weight 10.2kg
Sound Pressure Level 102dB(A)
Sound Power Level 115dB(A)
Vibration Level (L/R) 3.3/3.3m/s2
Total Length without cutting tool 176cm
Standard Cutting Tool Woodcut 225-24 Saw Blade
Tank Volume 0.99L
Drive Shaft in Shaft Solid
Stihl Anti Vibration System 4-Point
STIHL ErgoStart (E) Yes
Multi-Function Handle Yes
Loop Handle / Bike Handle Bike Handle
Tool-less Handle Adjustment Yes
Harness/Carrying System Yes
Stihl Engine (Mix) 2-MIX
Stihl M-Tronic (M) Yes
Mowing/Shredding/Sawing Jobs Standard - Sawing Jobs / Retrofittable - Mowing & Shredding Jobs
Warranty 2 Years
Extend your STIHL Warranty on this product by an extra year, when you buy it with a STIHL Smart Connector. We will register this warranty extension for you if you buy, so you don't need to do anything else to extend the cover once bought. For more information please read the details here!
Shop Online with confidence. Winchester Garden Machinery, a family-run business, are one of the largest retailers of garden machinery in the UK. We have been established for over five decades serving organisations, businesses, and valued customers both in store and online. Our four showrooms are based in the south, but you will experience the same high level of quality of service from our 50+ knowledgeable staff when you shop online or by phone, as you would do in our showrooms.
Fast Delivery
Most products are shipped to be delivered in 2-5 days as standard. Next day service is offered, please check shipping options upon checkout. Larger items, such as Tractors & Chippers will take longer.
Authorised Dealers
We are authorised retailers for all of the equipment we sell including top brands such as Honda, Stihl, Husqvarna, Hayter, Toro and Countax.
Price Promise
A vast majority of our products for sale online have discounts applied so we are always competitive on price. If you feel we are not competitive enough, please contact us and let us know.
Aftersales
As a top retailer we offer expert advice on the machinery we sell, along with servicing and spare parts.
Commitment to Quality
Our friendly and professional staff are available by telephone or email to give expert advice on the best machines to suit your requirements and ensure that you receive the best quality at the right price.